Reliable Lift Station Services for Municipal & Commercial Facilities

At Franc, A Wind River Company, we provide lift station repair, maintenance, and cleaning for municipalities, commercial, and industrial facilities across Greater Philadelphia. Since 1998, our local team has supported pump stations and sanitary sewer system infrastructure in Bucks County, Montgomery County, northern Philadelphia, and Mercer County NJ.

As part of the Wind River Environmental network, we pair nearly 30 years of local field experience with the reach of more than 1,100 wastewater professionals, 1,000 service vehicles, and 100 local teams. That combination of on-the-ground familiarity and large-scale resources helps you keep critical wastewater infrastructure compliance on track and reduce the risk of sewage backups and overflows.

Lift station failure is not just an inconvenience. It can trigger emergency bypass pumping, environmental impact, and potential regulatory attention. We focus on proactive care so you can focus on running your municipality or facility.

Call (215) 261-5790 to schedule lift station repair, maintenance, and cleaning or to discuss a Preventative Maintenance Programs plan for your sites.

Integrated Lift Station Repair, Maintenance & Cleaning

We treat lift station repair, maintenance, and cleaning as one connected service, not three separate line items. Our goal is to identify problems early, correct them quickly, and keep your system operating reliably.

24/7 Lift Station Repair

We offer 24/7 emergency repair services when a lift station failure puts operations at risk. Our technicians work on submersible pump assemblies, sewage ejector units, and related components so you can restore capacity as quickly as conditions allow.

• Pump repair and replacement. Submersible pump repair, impeller and seal issues, and performance checks when flows drop or alarms increase.
• Float and valve service. Evaluation and correction of float malfunctions, stuck or leaking valves, and related hydraulic issues.
• Electrical fault diagnosis. Troubleshooting power faults, motor starters, and control circuits contributing to nuisance trips or non-start conditions.
• Control panel troubleshooting. Investigation of alarms, setpoint issues, and component failures at the control panel so your system responds correctly to changing levels.

Routine Lift Station Maintenance

Routine maintenance visits focus on catching issues early so you can plan work instead of reacting to it. During each visit, we complete component inspections tailored to your station.

• Component inspections. Pumps, floats, valves, electrical control panels, and the wet well structure are checked for wear, damage, and operational concerns.
• Performance review. We review run times, alarms, and recent behavior to help you understand how the station is handling current flows.
• Actionable recommendations. When we see early signs of trouble, we share options so repairs can be scheduled in a controlled way.

Lift Station Cleaning & Wet Well Vacuuming

Effective lift station cleaning helps control odors, protect equipment, and maintain pumping efficiency. We use wet well vacuuming to remove accumulations from the mat layer on top to the heavy rocks and debris at the bottom of the tank.

• Wet well cleaning. Removal of solids, grease, oils, and debris that can clog impellers and strain motors.
• Odor and buildup control. Addressing material that contributes to foul odors, stagnant conditions, and premature pump wear.
• System check after cleaning. Inspection of the wet well, visible pump components, and floats once cleaning is complete.

After each visit, we provide real-time reporting with service notes and photos so you have a clear documented record of work performed at each pump station.

Why Municipalities & Facility Managers Choose Franc, A Wind River Company

Managing wastewater infrastructure is high-stakes work. You need a team that understands both the technical demands of lift stations and the accountability that comes with public and commercial oversight.

• Credentialed technicians. Many of our technicians hold accreditations from the Pennsylvania Septage Management Association and the National Association of Wastewater Technicians (NAWT). They are licensed, insured, and trained in confined space safety protocols appropriate for wet well and pump station environments.
• Local presence, network strength. We know the conditions, regulations, and expectations across Bucks, Montgomery, and Mercer counties, and we bring the equipment depth of the Wind River Environmental network to every job.
• Honest, upfront pricing. We provide clear, line-item estimates with no hidden fees so you can budget accurately for municipal, commercial, and industrial work.
• Real-time reporting for your records. After each service, you receive real-time reporting with detailed service notes and photos. This supports internal recordkeeping, wastewater infrastructure compliance efforts, and future planning.

For many of our clients, documented maintenance is as important as the work itself. Our reporting approach is designed to show that your lift station is being actively managed.

Preventative Maintenance Programs for Lift Stations

Our Preventative Maintenance Programs are built to reduce the risk of unplanned outages and help you avoid last-minute emergency calls. Each program pairs scheduled service with clear documentation so you can demonstrate ongoing care.

We tailor visit frequency to each lift station based on flow patterns, age, and operating conditions. Stations serving high-demand areas or critical facilities often benefit from more frequent visits than low-flow or standby assets.

• Comprehensive service at each visit. Preventative Maintenance Programs visits typically include component inspections, wet well vacuuming, pump repair work as needed, and control checks.
• Early issue detection. Regular visits help us uncover clogs, corrosion, early electrical problems, and wear before they escalate into urgent failures.
• Support for budgeting. Identifying developing issues early allows you to plan repairs and capital improvements, which can support more predictable operating costs over time.
• Documented management. Consistent maintenance produces documented evidence that your lift station is being actively managed, which is important for municipal and commercial oversight.

Unplanned lift station failures can lead to emergency repair costs and potential environmental violations that far exceed the cost of routine care. A well-structured Preventative Maintenance Programs schedule helps you manage that risk.

Warning Signs Your Lift Station Needs Service

Facility managers and municipal operators are often the first to notice changes in lift station behavior. The sooner those signs are addressed, the easier it usually is to correct the problem.

• Unusual pump noises. Grinding, rattling, or persistent humming can point to mechanical wear, debris contact, or electrical issues within the submersible pump or sewage ejector.
• Frequent alarms. Repeated high-level alarms, power fault alerts, or ongoing control panel warnings suggest the system is struggling to keep up with flow or encountering recurring faults.
• Visible damage or corrosion. Corrosion on the wet well structure, guide rails, wiring, or junction boxes is a sign that components need evaluation.
• Persistent foul odors. Strong odors near the lift station or adjacent structures can indicate stagnant wastewater, buildup in the wet well, or ventilation concerns.
• Slow drainage or backups. Slow drainage or sewage backup in connected lines may reflect reduced pumping capacity or partial blockages.
• Float malfunctions. Pumps that run continuously or fail to start can be tied to float or level-sensing issues, which accelerate wear and increase the risk of failure.
• Heavy solids and grease buildup. Visible buildup of solids, grease, and oil in the wet well can clog impellers, overload motors, and shorten equipment life.

If you are seeing any of these issues at a pump station, we can assess the situation and recommend the right combination of cleaning, maintenance, and repair.

Lift Station Service FAQs

How often should a lift station be serviced?

Inspection and cleaning at least once per year is a common baseline for many lift stations. Higher-demand stations, or those serving critical facilities, often benefit from more frequent visits. We build each Preventative Maintenance Programs schedule around your station’s actual flow patterns, age, and operating environment.

What does a lift station cleaning visit include?

During a cleaning visit, our technicians perform wet well vacuuming and debris removal from the mat layer on top to the heavy rocks and debris at the bottom of the tank. We also inspect pumps, floats, valves, and electrical controls, then provide real-time reporting with notes and photos so you know exactly what was done.

What happens if a lift station is not maintained?

When maintenance is deferred, debris and grease accumulate in the wet well, pumps work harder than designed, and components tend to wear out faster. Over time, this raises the likelihood of sewage backups and overflows, equipment damage, unplanned downtime, and potential regulatory exposure.

Do you provide emergency service in my area?

Yes. We provide 24/7 emergency lift station repair service throughout Bucks County, Montgomery County, northern Philadelphia, and Mercer County NJ. If you are unsure whether a site is within our service area, our team can confirm coverage and dispatch options when you call.

Keep Your Lift Stations Running Reliably

Franc, A Wind River Company supports municipal sewer networks, commercial campuses, and industrial facilities throughout Greater Philadelphia with integrated lift station repair, maintenance, and cleaning. Whether you need immediate help at a problem station or want to put a Preventative Maintenance Programs plan in place, we are ready to help.

Call (215) 261-5790 today to schedule service or talk with our team about a tailored maintenance program for your lift stations.